Low Smoke Zero Halogen LSZH Kabel
Oanfraach
Low reek nul Halogen kabel brûkt yn iepenbiere en oerheidsgebouwen en dêr't der gefoelige elektroanyske apparatuer, dizze kabels binne ûntwurpen foar ferhege feiligens yn it gefal fan in brân: Reduksje yn gefaarlike dampen dy't kin feroarsaakje blessuere doe't ynademe;Reduksje fan korrosive gemikaliën dy't skea kinne feroarsaakje oan elektroanika.
Konstruksje
Dirigint | Solid, stranded koper of aluminium |
Isolaasje | XLPE |
Amouring | 1) Net bewapene 2) Stiel tape pânsere (STA) 3) Steel wire armoured (SWA) Aluminium wire armoured (AWA) |
Skede | LSOH materiaal |
Skaaimerken
1) Nominearre spanning: 0.6/1kV
1) De temperatuer fan it lizzen fan kabel is net leger as 0 ° C.
3) Max.trochgeande normale wurking Temperatur: 90 ° C
4) Max.tastiene temperatuer by koartsluting (5s. op langste): 250 ° C.
5) tastiene bûge radius:
Single kearn: ≥20(d+D)±5%.
Trije kearn: ≥15(d+D)±5%
(D is de werklike totale diameter fan kabel, en d is de werklike totale diameter fan dirigint).
Standerts
Ynternasjonaal: IEC 60502, IEC 60227 IEC 60331, IEC 61034
Sina: GB/T 12706-91 GB306.1-2001, GB/T18380.3-2001
Oare noarmen lykas BS, DIN en ICEA op oanfraach
Parameters
Nom.Dwerstrochsneed fan dirigint | Isolaasje dikte | Skede | Ca. | Ca | Max.DC-resistinsje fan dirigint (20 °C) | Test Voltage | Aktuele wurdearring | |
mm2 | mm | Dikte | OD | Gewicht | Ω/km | AC | ||
mm | mm | kg/km | kV/5 min | Yn loft (A) | Yn grûn (A) | |||
4×1,5 | 0.7 | 1.8 | 14.4 | 241 | 12.1 | 3.5 | 20 | 27 |
4×2,5 | 0.7 | 1.8 | 15.4 | 295 | 7.41 | 3.5 | 26 | 35 |
4x4 | 0.7 | 1.8 | 16.5 | 369 | 4.61 | 3.5 | 34 | 45 |
4x6 | 0.7 | 1.8 | 17.8 | 463 | 3.08 | 3.5 | 43 | 57 |
4x10 | 0.7 | 1.8 | 20.9 | 667 | 1.83 | 3.5 | 60 | 77 |
4x16 | 0.7 | 1.8 | 23.4 | 930 | 1.15 | 3.5 | 83 | 105 |
4x25 | 0.9 | 1.8 | 27.1 | 1351 | 0.727 | 3.5 | 105 | 125 |
4×35 | 0.9 | 1.8 | 29.5 | 1772 | 0.524 | 3.5 | 125 | 155 |
4x50 | 1 | 1.9 | 38.4 | 2380 | 0.387 | 3.5 | 160 | 185 |
4x70 | 1.1 | 2 | 43.2 | 3302 | 0.268 | 3.5 | 200 | 225 |
4x95 | 1.1 | 2.2 | 47.3 | 4330 | 0.193 | 3.5 | 245 | 270 |
4×120 | 1.2 | 2.3 | 52.5 | 5374 | 0.153 | 3.5 | 285 | 310 |
4×150 | 1.4 | 2.5 | 58.3 | 6655 | 0.124 | 3.5 | 325 | 345 |
4×185 | 1.6 | 2.7 | 64.7 | 8246 | 0.0991 | 3.5 | 375 | 390 |
4×240 | 1.7 | 2.9 | 73.1 | 10569 | 0.0754 | 3.5 | 440 | 450 |
5×1,5 | 0.7 | 1.8 | 13.6 | 284 | 12.1 | 3.5 | 20 | 27 |
5×2,5 | 0.7 | 1.8 | 16.6 | 349 | 7.41 | 3.5 | 26 | 35 |
5x4 | 0.7 | 1.8 | 17.9 | 441 | 4.61 | 3.5 | 34 | 45 |
5x6 | 0.7 | 1.8 | 19.3 | 558 | 3.08 | 3.5 | 43 | 57 |
5x10 | 0.7 | 1.8 | 22.8 | 809 | 1.83 | 3.5 | 60 | 77 |
5x16 | 0.7 | 1.8 | 25.6 | 1135 | 1.15 | 3.5 | 83 | 105 |
5x25 | 0.9 | 1.8 | 29.7 | 1664 | 0.727 | 3.5 | 105 | 125 |
5x35 | 0.9 | 1.9 | 32.6 | 2194 | 0.524 | 3.5 | 125 | 155 |
5x50 | 1 | 2 | 37.3 | 3013 | 0.387 | 3.5 | 160 | 185 |
5x70 | 1.1 | 2.1 | 42.9 | 4101 | 0.268 | 3.5 | 200 | 225 |
5x95 | 1.1 | 2.2 | 48.2 | 5382 | 0.193 | 3.5 | 245 | 270 |
5×120 | 1.2 | 2.4 | 52.7 | 6685 | 0.153 | 3.5 | 285 | 310 |
5×150 | 1.4 | 2.5 | 58,5 | 8363 | 0.124 | 3.5 | 325 | 345 |
5×185 | 1.6 | 2.7 | 65.1 | 10268 | 0.0991 | 3.5 | 375 | 390 |
5×240 | 1.7 | 3.1 | 72.3 | 13167 | 0.0754 | 3.5 | 440 | 450 |
4×2,5+1×1,5 | 0.7 | 1.8 | 16.5 | 313 | 7.41 | 26 | 35 | |
4×4+1×2,5 | 0.7 | 1.8 | 17.7 | 424 | 4.61 | 34 | 45 | |
4×6+1×4 | 0.7 | 1.8 | 19.1 | 535 | 3.08 | 43 | 57 | |
4×10+1×6 | 0.7 | 1.8 | 22.1 | 760 | 1.83 | 60 | 77 | |
4×16+1×10 | 0.7 | 1.8 | 25.1 | 1071 | 1.15 | 83 | 105 | |
4×25+1×16 | 0.7 | 1.8 | 29 | 1556 | 0.727 | 105 | 125 | |
4×35+1×16 | 0.9 | 1.9 | 31.4 | 1976 | 0.524 | 125 | 155 | |
4×50+1×25 | 1 | 2.1 | 36 | 2689 | 0.387 | 160 | 185 | |
4×70+1×35 | 1.1 | 2.2 | 41.1 | 3719 | 0.268 | 200 | 225 | |
4×95+1×50 | 1.1 | 2.4 | 46.3 | 4903 | 0.193 | 245 | 270 | |
4×120+1×70 | 1.2 | 2.5 | 51 | 6165 | 0.153 | 285 | 310 | |
4×150+1×70 | 1.4 | 2.7 | 55.8 | 7431 | 0.124 | 325 | 345 | |
4×185+1×95 | 1.6 | 2.9 | 62.1 | 9192 | 0.0991 | 375 | 390 | |
4×240+1×120 | 1.7 | 3.1 | 68.8 | 11860 | 0.0754 | 440 | 450 |
FAQ
F: Kinne wy ús logo of bedriuwsnamme hawwe om te printsjen op jo produkten as it pakket?
A: De OEM & ODM-oarder is fan herte wolkom en wy hawwe folslein suksesfolle ûnderfining yn OEM-projekten.Wat mear is, ús R&D-team sil jo de profesjonele suggestjes jaan.
F: Wat binne de betellingsbetingsten?
A: 30% T / T boarch, 70% T / T balâns betelling foar shipment.
F: Hoe docht jo fabryk oangeande kwaliteitskontrôle?
A: Wy hawwe in strang kwaliteitskontrôlesysteem, en ús profesjonele saakkundigen sille it uterlik en testfunksjes fan al ús items kontrolearje foar it ferstjoeren.
F: Hoe kin ik in stekproef krije om jo kwaliteit te testen?
A: Wy kinne fergees samples leverje foar jo test en kontrôle, moatte gewoan de frachtkosten drage.